Jan 14

The Uniform Coating of Electroless Nickel

There are many advantages to using an electroless nickel coating. As specialists in the process of electroless nickel plating, NiTEC are often asked about the uniformity of coating that electroless nickel can provide.

The uniformity of an electroless nickel coating makes it perfect for use on engineering components, as a component’s machined tolerances are not deformed by the process.

The coating deposited by the process of electroless nickel plating is based on a chemical reaction. Therefore, the nickel collects in equal thickness over the component, whatever its shape and size.

The uniform coating of the nickel plating means that the surface is very hard wearing, resistant to corrosion and durable in a variety of environments, making it a suitable choice for engineering components.


If you would like more information about the process of nickel plating, or would like to find out how the process could benefit your business, contact the team at Nitec today on (0)845 224 3571 or visit our website for more information.

Jan 10

The Best Way to Keep Your Bike Rust and Scratch Free

An avid cyclist will know that after owning a bike for a long period of time, there may be areas on the frame where the paint has begun to bubble, and is looking a little worse for wear. Everyone would prefer to keep their bike clean and undamaged, but of course, the practical use of a bike is to ride it!

Sadly, crashes and accidents do happen some times, and scratches are a common occurrence in these circumstances. Mountain bikes and road bikes are exposed to all sorts of conditions through general use, including exposure to water, mud and salt.

If your bike has a steel frame and the scratch has gone through to the bare metal, it’s best to clean the area and then touch it up using paint to prevent it from rusting.

Providing that the damage hasn’t compromised the structure of the actual bike frame, aluminium or carbon fiber can be left without too much concern.

But if you would like to say goodbye to rust, scratches and corrosion forever, having your bike frame nickel plated is a great way to do so. When applied to a bike frame, an electroless nickel coating will protect your bike and prevent it from getting scratched in the unfortunate event of a fall or accident, or just general wear and tear.

The process of electroless nickel plating will also stop the risk of corrosion and rust occurring in the future, as electroless nickel is very resistant to corrosion.

It only costs £185 to have your bike electroless nickel plated by the experts at Nitec. In just 5 days of receiving your bike, we can have it nickel plated and scratch and corrosion resistant for life. All you have to do is disassemble your bike, send us the handlebars and frame, and we’ll electroless nickel plate the parts and return them to you for reassembly.

To find out more about having your bike frame electroless nickel plated, contact the team at Nitec today on (0)845 224 3571 or visit our website at for more information.

Jan 09

Increase the Lifespan of Steam Turbines with Electroless Nickel Plating

Based in Derbyshire, Nitec have a wealth of experience electroless nickel plating for large multinational companies and a wide variety of industries.

As a leading provider of worldwide metal plating services, Nitec have recently worked with Elliott Turbo-Steam Turbines. Elliot steam turbines are specially built to be able to perform for years, and they have an excellent reputation as being the best in the industry.

Elliot steam turbines are very reliable and hard wearing, and by adding an electroless nickel coating, their life span can be further increased. As the addition of an electroless nickel coating is very hard, it can reduce the wear of the part when friction is an issue.

Elliot steam turbines are used in power generation and food processing,  chemical and petrochemical, pulp and paper, and the oil and gas industry.

For more information on how electroless nickel coatings can be used to increase the lifespan of components and reduce wear through friction, contact Nitec by visiting our website, or speaking to a member of our specialist team on 0845 224 357.

Jan 09

Electroless Nickel Plating for Rutherford Appleton Laboratories

Rutherford Appleton Laboratories approached Nitec with the prospect of nickel plating a laboratory vacuum chamber. As specialists in the process of electroless nickel plating, the staff at Nitec gladly took on the project.

Thousands of scientists and engineers have used the lab to carry out their research in lots of areas, including astronomy, physics and light sources. With such important research in mind, electroless nickel plating specialists Nitec had to meet all the relevant regulations in order to comply with the high standards requested by Rutherford Laboratories.

The equipment requiring surface treatment was a vacuum chamber, used by the laboratory to carry out tests and experiments  The iron from the chamber walls was a concern for Rutherford Laboratories, as it could affect the results of tests. The lasers which are used in experiments such as these actually had the power to burn through the paint, therefore the chamber needed to be coated with a thin layer of electroless nickel to prevent this happening.

Nitec have a large amount of experience in plating unusually shaped objects and equipment. The expert staff at Nitec had to manufacture tanks to fit each part of the vacuum chamber, as the chamber came in several sections. Some of the parts weighed more than 20 tonnes.

The chamber itself was built like a small room, and had many portals, doors and windows which presented Nitec with the problem of gas traps formed by the recesses. Therefore, the chamber itself, which was originally going to be used as the plating tank and filled with the electroless nickel plating solution, had to be sheeted over and internally shot blasted.

Blanking plates were made for each section of the chamber, and each one was fitted with an air pipe which fed up and outside the chamber in order to remove any excess solution and gas. This process ensured that the vacuum chamber was completely covered by the electroless nickel coating, meeting the high standards of quality required by the laboratory in order for all tests and experiments to be accurate and successful.

To find out more about how Nitec can help your business with their electroless nickel plating needs, even if the object is particularly large or unusually shaped, why not visit our website and take a look at the projects we have embarked upon recently. If you would like to speak to one of the electroless nickel plating experts at Nitec, don’t hesitate to call our friendly team on 44 (0)845 224 3571.

Dec 21

Use Electroless Nickel Plating to Replace Hard Chrome

There are many advantages to using electroless nickel plating as an alternative to hard chrome.

Hard chrome is a common choice where the hardness and wear resistance of a component are important. The hardness of hard chrome is in the region of 800 – 1100 VHN.

The hard chrome deposit, however, is applied electrolytically. Metal coatings applied electrolytically generally create an uneven coating which may need post plating machining. The difference in coating uniformity between electrolytic and and electroless nickel plating is illustrated in the image below, and the same theory can be applied to hard chrome applied eloctrolytically and electroless nickel plating. Another disadvantage to hard chrome is that it tends to soften with heating.

Electroless nickel deposits form a perfectly uniform coating, unlike hard chrome. Although electroless nickel does not give the same level of hardness, the process of heat treatment can be used to harden it. Some electroless nickel deposits can be harder than 1000 VHN, making the hardness of electroless nickel plating comparable to that of hard chrome.

As well a electroless nickel plating, NiTEC also specialise in diffused nickel plating finishes, copper plating as a process, shotblasting and heat treatment.

To find out more about electroless nickel plating visit the NiTEC website.

Dec 19

Quality Electroless Nickel Plating Service

Here at NiTEC, our staff are thoroughly committed to providing a quality electroless nickel plating service.

All employees at NiTEC are responsible for the making sure that Quality Assurance techniques are applied to their work. They are also responsible for achieving the specified quality levels at all stages of work.

In accordance with the requirements of BS EN ISO 9001:2000, we are committed to following our Quality Assurance Program, which is outlined in our Quality Manual.

NiTEC is also well equipped for all aspects of quality control and product testing. We have invested in facilities and equipment meaning that the staff at NiTEC have the ability to carry out non destructive testing for thickness and hardness on components.

Work is regularly processed to the following specifications:

  • Defence Standard 03-5
  • Aerospace Material Specification AMS 2404B
  • US Military Specification MIL-C-26074B
  • International Standard ISO 4527

We are able to tailor numerous in-house specifications in order to meet the customers’ exact requirements. Our policy statements are available to read online by clicking the links below:

Dec 19

Cheaper Alternatives to Stainless Steel

As specialists in electroless nickel plating, NiTEC are passionate about promoting the advantages of the process over using other metals, such as stainless steel.

Stainless steel is very resistant to corrosion, and can therefore be used when the levels of hardness of the metal are important. But using electroless nickel plating as an alternative to stainless steel has many advantages. Mild steel or cast iron with an electroless nickel coating is a much more cost effective way of achieving high levels of hardness and corrosion resistance.

Stainless steel doesn’t corrode, rust or stain easily with water as ordinary steel would do, but despite its name, stainless steel is not actually fully stain proof.  Stainless steel will in fact stain and even corrode in conditions where there are low levels of oxygen, high levels of salt or poor circulation.

If you are interested in the process of  electroless nickel plating as a cheaper alternative to stainless steel, contact NiTEC on 0845 2243571 or email web@nitec-enp.co.uk and we’ll show you how much you can save.

For more information on the many advantages of electroless nickel plating including hardness and corrosion resistance, please visit out website.


Dec 19

How Hard is Electroless Nickel Plating?

As a specialist electroless nickel plating company in Chesterfield, Nitec are experts in the plating industry. A question that is frequently asked by customers and potential customers alike is ‘Exactly how hard is electroless nickel plating?

Depending on the phosphorus content in the deposit, electroless nickel deposits have hardness values in the range of 450 – 750 VHN. As a rule, the higher the  phosphorus content, the lower the deposited hardness of the electroless nickel.Mild steel with an electroless nickel coating has properties of hardness and corrosion resistance exceeding the benefits offered by stainless steel.

Increasing hardness of electroless nickel using heat treatment

An effective way of increasing the hardness of the electroless nickel coating is by using the process of heat treatment. Heat treatment can increase the hardness of electroless nickel coatings to in excess of 1000 VHN. This makes the nickel deposit hardness on par with hard chrome, with the added advantage of an even coating which will not require any machinery after plating.

For more information about how we can fulfill your nickel plating requirements, or for advice on using electroless nickel plating an as alternative to stainless steel, please visit the Nitec website, or call our friendly team of staff on 0845 224 357.


Dec 10

Electroless Nickel Plating as an Alternative to Stainless Steel

The electroless nickel plating process is a cost effective solution to coating metals such as mild or stainless steel.

And despite the lower price, electroless nickel coatings still maintain a high level of quality.

Advantages of electroless nickel plating

The metal layer deposited by the electroless nickel plating process has an even thickness over all surfaces of the component, virtually regardless of its shape. This uniform coating is the perfect solution for critical high-end engineering items such as those used in the defense  healthcare, automotive and aerospace industries.


How corrosion resistant is electroless nickel?

Electroless nickel is perfect for parts that are regularly exposed to harsh environments such as the marine, oil and gas and defense industries. Nickel plating is very resistant to corrosion and will therefore substantially extend the life of a component. Therefore it can reduce the cost of repair and replacement parts.

How hard is electroless nickel?

When electroless nickel plating is used in association with an appropriate heat treatment, it can be hardened up to 950vhn. Electroless nickel plating is therefore ideal in areas where friction and wear are issues.

If you would like to find out more about nickel plating as an alternative to stainless steel, contact NiTEC on (0)845 224 3571, email us at web@nitec-enp.co.uk, or visit our website for more information.

Dec 10

Large Capacity Electroless Nickel Plating

NiTEC are leading specialists in the process of electroless nickel plating. 

As a plating company established in 1978, we have developed a wide range of techniques and developed leading technology within the plating industry.

High end plating services, cost effective price

NiTEC are able to provide a high-end nickel plating service at a cost-effective price. We have a total of 5 production lines with a standard lead time of just 5 days. The number of production lines in operation means that our capacity is efficient, our prices reasonable, and our turn around fast.

How big are our electroless nickel plating tanks?

At NiTEC, we have tanks up to 10 metres in length. In addition to these large tanks, we also have a lifting capacity of up to 20 metric tonnes, meaning that we can plate very large objects with ease.

The size and lifting capacity of the facilities at NiTEC are unique in the UK, as the maximum competitive solution is only 3 metres in length. We can plate parts of all sizes, from small pins to large applications such as oil pipelines.

Our onsite laboratory facilities ensure that all our metal plating processes are closely controlled, maintaining a consistently high level of quality.

If you have a large component that you need nickel plating, but are concerned about size restrictions or weight, contact NiTEC on (0)845 224 3571, email us at web@nitec-enp.co.uk, or visit our website for more information. We have the capacity to plate very large components and are rarely defeated!